Coin Mechs

Through the use of multiple wavelength optical sensing and sophisticated data processing, the ZT Series 1000 bill/note acceptor sets the standard for rejecting invalid bills.
PLEASE NOTE - THIS STOCK IS SOLD AS-IS, BRAND NEW. PRODUCT CANNOT SUPPORT $5 AND CANNOT BE UPGRADED - no warranty.

The mech contains intelligent sensing algorithms, which allow the acceptors to provide accurate, reliable validation.

Coin Controls C120 Electronic Coin Mechanisms will recognise and validate up to 12 different coins and/or tokens. The latest validator technology ensures high control over the acceptance of programmed coin types and rejection of fakes.

The C120 coin mechanism can be used for new or retrofit applications in the Arcade, Pinball, Gaming and Vending areas and is currently programmed to accept AUD 20c, $1 and $2 coins.

Coin Controls C120 Electronic Coin Mechanisms will recognise and validate up to 12 different coins and/or tokens. The latest validator technology ensures high control over the acceptance of programmed coin types and rejection of fakes.

Coin Controls C120 Electronic Coin Mechanisms will recognise and validate up to 12 different coins and/or tokens. The latest validator technology ensures high control over the acceptance of programmed coin types and rejection of fakes.

The C120 coin mechanism can be used for new or retrofit applications in the Arcade, Pinball, Gaming and Vending areas and is currently programmed to accept AUD 20c, $1 and $2 coins.

The Coin Controls C120 Electronic Coin Mechanisms will recognise and validate up to 12 different coins and/or tokens. The latest validator technology ensures high control over the acceptance of programmed coin types and rejection of fakes.

The Coin Controls C220 Electronic Coin Mech with Front Load/Front Reject - Arcade Programmed is a United Kingdom manufactured coin mechanism. The unit comes with a 15 pin parallel interface and a 6 pin serial interface. The coin mechanism is programmed to accept Australian Twenty cents, One and Two dollar coins for operation with Arcade machines.

The Coin Controls C220 Electronic Coin Mech with Front Load/Front Reject - Pinball Programmed is a United Kingdom manufactured coin mechanism. The unit comes with a 15 pin parallel interface and a 6 pin serial interface. The coin mechanism is programmed to accept Australian 20 cents, $1 and $2 coins for operation with Arcade Pinball machines.

The Coin Controls C220B Electronic Coin Mech with Front Load / Front Reject is a United Kingdom manufactured coin mechanism and the unit comes with a 15 pin parallel interface and 5 pin serial interface. The coin mechanism is programmed to accept Australian Twenty cents, One and Two dollar coins for operation with Arcade Pinball machines.

The Coin Controls C220B Electronic Coin Mech with Front Load / Front Reject is a United Kingdom manufactured coin mechanism and the unit comes with a 15 pin parallel interface and 5 pin serial interface. The coin mechanism is programmed to accept Australian Twenty cents, One and Two dollar coins for operation with Arcade Pinball machines.

The Coin Controls C220B Electronic Coin Mech with Top Load/Front Reject is a United Kingdom manufactured coin mechanism, the unit comes with a 15 pin parallel interface and a 4 pin serial interface. The coin mechanism is programmed to accept Australian Twenty cents, One and Two dollar coins for operation with Arcade machines.

The coin mechanism can be programmed to accept eight different types of coins.

A UK manufactured coin mech, the unit comes with a 15 pin parallel interface and a 6 pin serial interface. The coin mech can be programmed to accept 8 different types of coins.

A UK manufactured coin mech, the unit comes with a 15 pin parallel interface and a 6 pin serial interface. The coin mech can be programmed to accept 8 different types of coins.

This coin mechanism wiring harness kit is used to connect a coin mechanism to a cabinet.
It is suitable for connecting any electronic coinmech or coin validator such as QL, Weiya, C120, NRI via the 10pin coin mech ribbon cable and 5 pin open wire connector harness included in this kit.

The Comestero Face Plate is designed to attach to the front of a note acceptor, and acts as a feeder. Simply feed your bank note through the faceplate and it will feed it through to the acceptor.

Innovative Technology currency note reader. Model number NV8.

Suited for use with a Microcoin Coin mechanism.

Suited for Microcoin coin mechanisms.

Through the use of multiple wavelength optical sensing and sophisticated data processing, the ZT Series 1000 bill/note acceptor sets the standard for rejecting invalid bills.
PLEASE NOTE - THIS STOCK IS SOLD AS-IS, BRAND NEW. PRODUCT CANNOT SUPPORT $5 AND CANNOT BE UPGRADED - no warranty.

The Mars ME126 is an electronic coin mechanism for amusement applications. These units have a Top Load/Bottom Reject configuration.

MS100 Top Load electronic coin mechanism. 4-Coin acceptor with a Positive Common Interface only. It needs a 12 volt supply, but will work with a voltage of between 10 and 15 volts. Peak operating current is 2.3A (at moment of coin acceptance). The acceptor has a 13 pin connector. Sorry we are unable to reprogram.

The Mars MS126 is an electronic coin mechanism for amusement applications. These units have a Top Load/Bottom Reject configuration.

The coin validator from microcoin, main feature is versatility by it's many programming options. Allowing it to be fully tailored to meet the operators requirements.

A top loading electronic coin mech, with enhanced security features over the S5 & S6 models. Due to the enhanced security these mechs are generally used in gaming machines.

A replacement 10 wire flat ribbon cable which can be used with NRI coin mechs and equivalent (C120, RM5, etc). The cable is 1 metre long, giving you enough length for installation into any cabinet. The interface is the standard 10pin connector on each end, which goes from the coin mech to the credit board of the machine.

A bottom rejecting coin validator using accurate measurement technology with a large number of options for credit counting and vending-machine communication.

Pacific Coin Validator PCB: Model - Pacific 02

The RM5 Evolution is an electronic coin validator for Australian coins. It is made in Italy and is a very high quality product. The RM5 Evolution is a Top Load/Bottom Reject mechanism, but can be adapted to be front loading through the use of an RM5 faceplate, however it will always be bottom rejecting.

The RM5 Evolution RM5-T10 is a Dual Price Totaliser with timer function. It is an electronic coin validator that allows any service, where cost is determined by time used, to be paid automatically. It is particularly suited to car washes, parking meters, laundromats and other self service applications. The validator itself is Top Load/Front Reject, but can be adapted to Front Load/Front Reject through the use of an RM5 face plate.

The RM5 Evolution is a series of high quality, Italian made electronic coin validators. The RM5T30 model is Top Load/Front Reject mechanism, but can be adapted to Front Load/Front Reject, through the use of an RM5 faceplate. When using the top loading face plate, the RM5 Evolution is completely interchangeable with NRI or C120 coin mechanisms.

A front loading electronic coin mechanism with a face plate. The device contains a CPU anti-string program that prevents customers from tricking the coin mechanism into giving free credits.

The Top Loading Multi Coin Selector HI-11UCSG supports 8 channels and can accept up to 8 kinds of coins at the same time. It is self-programming and features an inhibit line for the main machine/ game board. Programmed for Australian coins including 20c, $1 and $2 coins.

The Weiya HI-11FCSG606 Front Loading Electronic Coin Mech is designed for Australian Coins and supports 20c, $1, $2 and tokens. Self programming without PC, this coin mechanism includes face plate with cables.