The Top Loading Multi Coin Selector HI-11UCSG supports 8 channels and can accept up to 8 kinds of coins at the same time. It is self-programming and features an inhibit line for the main machine/ game board. Programmed for Australian coins including 20c, $1 and $2 coins.
This coin selector accepts coin size diameter 18mm-30mm, and thickness 1.2mm ~ 3.0mm (adjustable 4 kinds of coin thickness). It is suitable for a range of machines and application including amusement machines and vending machines.
About Top Loading Multi Coin Selector HI-11UCSG for Australian Coins
The Top Loading Multi Coin Selector HI-11UCSG supports 8 channels and can accept up to 8 kinds of coins at the same time. It is self-programming and features an inhibit line for the main machine/ game board. Programmed for Australian coins including 20c, $1 and $2 coins.
This coin selector accepts coin size diameter 18mm-30mm, and thickness 1.2mm ~ 3.0mm (adjustable 4 kinds of coin thickness). It is suitable for a range of machines and application including amusement machines and vending machines.
Unit Dimensions :
5.5W x 10.0D x 10.2H cms
Condition :
New
Shipping Weight :
0.300 kg
Physical Weight :
0.207 kg
Location :
Australia
Warranty :
90 Days Warranty
Product Type :
Coin Mechs
More About Top Loading Multi Coin Selector HI-11UCSG for Australian Coins
Features:
Supports 8 channels (coins) self-programming without PC
With an inhibit wire for game board
With 6 channel parallel output for each channel (coin) control
Support one coin then multi pulse output (impulse out ratio)
With narrow or wide impulse width select (100ms and 50ms)
Adjustable 4 kinds of coin thickness
setup for use with Australian coins
Specifications:
Power Input: DC 10-15V, 300mA max. Standby 50mA
Power Consumption: 5.0 watts max. Standby 0.6 watts
Impulse Output signal: Multi pulse (normal "high" level)
Inhibit Input signal: High enable (+3v ~ +15v)
Out 1-6 Output signal: 1 pulse/coin
Input/Output Connector: 4 pin male extend connect port, 6 pin male general I/O port
User controls: 5-ch - sw1, sw2, sw3 for channel or impulse ratio select, dip switch - sw4, sw5 for mode and other function select
