Coin Accessories

A 4 digital display with the housing and wiring to easily mount into a machine.

A 4 digital display with the wiring to easily mount into a machine.

Adjoining top coin entry for use on flat surfaces. Smaller dimensions for ease of installation.

Adjoining top coin entry for use on sloped surfaces.

Additional Housing to allow the operator to security mount the coin mech to the machine.

Additional Housing to allow the operator to security mount the coin mech to the machine.

Additional Housing to allow the operator to security mount the coin mech to the machine.

A transparent cover for the coin mech face plate.

Coin Chute Return Housing

Face plates for a coin mechanism, with coin reject button.

Coin mechanism face plate. Metallic, silver. No reject coin lever assembly.

Coin Mechanism Light Sockets.

This coin mechanism wiring harness kit is used to connect a coin mechanism to a cabinet.
It is suitable for connecting any electronic coinmech or coin validator such as QL, Weiya, C120, NRI via the 10pin coin mech ribbon cable and 5 pin open wire connector harness included in this kit.

A Comestero 4-digit display timer to activate time service through a connection to a mechanical coin mechanism.

Housing for the RM5 Series Electronic Validators and Totalisers.
Model: SPS41LCM4.
Designed to house all the models of the Comestero Group RM5 Evolution Validators and Totalisers.
Made of sturdy, lightweight black plastic.

This Front Loading Face Plate is for use with the RM5 series of electronic coin mechanisms. This face plate will cause the coin to insert into the front slot of the coin mech.

A face plate for use a top loading coin mech. This face plate will cause the coin to insert into the top slot of the coin mech.

The GP58CR is a high quality deluxe thermal printer from International Currency Technology Corporation (ICT). The GP58CR thermal printer is suitable for a wide range of arcade machines, especially video redemption and gaming products.

Innovative Technology currency note reader. Model number NV8.

Micro Coin Electronic Coin Mechanism Face Plate (Damaged)

Micro coin Face Plates - faulty

A replacement 10 wire flat ribbon cable which can be used with NRI coin mechs and equivalent (C120, RM5, etc). The cable is 1 metre long, giving you enough length for installation into any cabinet. The interface is the standard 10pin connector on each end, which goes from the coin mech to the credit board of the machine.

PCB Credit Board for Ticket Dispenser Type 2

Spare part for ticket dispenser

Panel used to test arcade Bike machine cabinets. Is able to test for one or two player combination.

Test Panel for Volume Buttons

Test Panel with Veeder-Root 6 Digit Counter. 12vDC working.
Service button mounted on frame.

Ticket Counter (black) Model:Z-15GW22-B

Ticket Counter (grey) Omron Model: D4MC-2020