All Products

TYCO ELECTRONICS Universal Mate Receptacle Housing, 4 Way N Lok Plug is a part of the Universal Mate N Lock Series. This item is a 4 pin Female connector to be used with the 4 pin Male connector of the same series.

Pump It Up Step Acrylic panel arrows are made of solid and durable acrylic material, suitable to replace the used dance platform's foot pads. customer screw out the metal square cover, then replace the new step acrylic pads on it, very easy and simple to recondition the used PIU dancing stage into "new" look.

3 pin micro switch suitable for Daytona / Sega Rally gear shifters, as well as many other machine applications.

TYCO ELECTRONICS / AMP 9 Way Plug Housing. Brand New, Plug only.

MOLEX 12 Way Receptacle Plug. Brand New

A replacement for the main PCB of the Boxer Matrix machine.

TYCO ELECTRONICS 15 Way Receptacle Housing. Brand New

A 3.3V power supply. This is the additional power supply needed to run the Naomi Hardware System. All other power is supplied by the Jamma Cabinet itself.

A wiring Harness that is part of the cables needed to allow Naomi Hardware system games to be plugged into a Jamma Cabinet. The harness also comes with a Sound Amp.

Cable Gland

12 Volt Power Amp PCB Board.

Western Dream Interrupter Board

LAI Relay PCB

The gun board expansion slot used with Atomiswave motherboards for gun games like Extreme Hunting.

DDR Red floor neon light part for your Dance Dance Revolution (DDR) floor panel.

A 6 piece kit that forms a push button for an arcade/gaming machine. The completed button has a hollow centre for the lamp to be inserted (lamp is included). Made by Spain's Industrias Lorenzo company.

This noise filter is designed for low impedance loads to supress line to ground and line to line interference. The filter is enclosed in a metal case and terminals on both sides.

A Interface PCB for the Star Print system used in Pacific Gaming machines.

Bladed Microswitch made by FTM. For use with arcade buttons for short panels.

240V to 108V transformer manufactured by Carinda International. 1 AMP output.

240 volt to 12 volt transformer.

A noise filter designed to have 250V plugged directly into it with a maximum load of 6A. Has 3 terminals at the back to wire in the power.

Cam metal door lock with key in 15mm length cylinder including latch. The key can be removed only in the locked position. 90 degree turn between locked and unlocked positions.

Tiger Scan is specially designed for less demanding applications. It is has a number of great features such as rotating gobos with indexed position, two-colour and rainbow effect beams and many others.

A compact power supply that outputs at 24V 2.3A. The Input can be 100~250V 1.6A 50/60/440Hz or DC 120~300 1A.

Fluorescent Ballast For 15W Lamp is a durable and long lasting semi low loss ballast for a fluorescent 15W lamp from ATCO. This ballast emits a massive power of 250v / 50Hz and is suitable for most fluorescent light applications. Furthermore coming from a credible manufacturer such as ATCO, you know that you are going to have bright powerful lights for a long time.

A Blanking Plate is used to cover holes in equipment. In such equipment as arcade and gaming machines, cars, etc.

Metal Cog

Made to linked Namco machines together like Rave Racer.

A fan with the measurements 8 x 8cms

Pinball Fuse Holders for Williams Pinball Machines

LAI Power Reset PCB

Interposer PCB (Different Model)

Interposer PCB

Plastic disk

A standard pushbutton microswitch made by Matsushita, for use with standard arcade push buttons.

Powertran EI-Core 240V AC mains transformer with 6.6A dual multi tapped secondary configuration. Two sets of 0V, 9V and 12V secondaries are available at a maximum current of 6.6A (max current when 9V secondaries connected in parallel) . Primary is fitted with 200mm fly leads.

Amplifier Power Supply PCB
Active Crossover PCB
Wiring
Cords

Assy: Steering Wheel Drvr-RFBD from Midway

Williams Electronics Games PCB

Namco PCB