All Products

Micro Coin Electronic Coin Mechanism Face Plate (Damaged)

A face plate for use a top loading coin mech. This face plate will cause the coin to insert into the top slot of the coin mech.

Additional Housing to allow the operator to security mount the coin mech to the machine.

Additional Housing to allow the operator to security mount the coin mech to the machine.

Additional Housing to allow the operator to security mount the coin mech to the machine.

Adjoining top coin entry for use on sloped surfaces.

Adjoining top coin entry for use on flat surfaces. Smaller dimensions for ease of installation.

Coin mechanism face plate. Metallic, silver. No reject coin lever assembly.

Housing for the RM5 Series Electronic Validators and Totalisers.
Model: SPS41LCM4.
Designed to house all the models of the Comestero Group RM5 Evolution Validators and Totalisers.
Made of sturdy, lightweight black plastic.

Micro coin Face Plates - faulty

A replacement 10 wire flat ribbon cable which can be used with NRI coin mechs and equivalent (C120, RM5, etc). The cable is 1 metre long, giving you enough length for installation into any cabinet. The interface is the standard 10pin connector on each end, which goes from the coin mech to the credit board of the machine.

This is a Coin Meter LCD counter that can count 4 inputs at the one time. It has the capability of displaying all 4 of these inputs at the same time, up to 7 digits per line. This unit can count up to 100 Coins Per Second and features a low power consumption design.

Innovative Technology currency note reader. Model number NV8.

TYCO ELECTRONICS Universal Plug Housing, 2 Way Mate N Lok Plug is a part of the Universal Mate N Lock Series. This item is a 2 pin Male connector to be used with the 2 pin Female connector of the same series.

Brand New Test panel featuring a meter, a volume dial, a test button and a service button.

A holder for a Non-Amplified Photomicrosensors. The sensors is threaded through the top of the holders. While the bottom 2 holes are for mounting purposes.

This Front Loading Face Plate is for use with the RM5 series of electronic coin mechanisms. This face plate will cause the coin to insert into the front slot of the coin mech.

A RCPT housing, drawer connector, 12 position Metrimate. Built to take up to 12 wires/pins, unit comes with 2 holes on the ends of the unit for easy mounting.

Test unit for facilitating testing of two player games. Also has facility for connection to the test and service functions and also a demagnetizing switch.

This model dispenses coins at a high speed, up to 600 coins per minute. It maintains accuracy and prevents coin overrun with the use of two proximity sensors.

Through the use of multiple wavelength optical sensing and sophisticated data processing, the ZT Series 1000 bill/note acceptor sets the standard for rejecting invalid bills.
PLEASE NOTE - THIS STOCK IS SOLD AS-IS, BRAND NEW. PRODUCT CANNOT SUPPORT $5 AND CANNOT BE UPGRADED - no warranty.

Through the use of multiple wavelength optical sensing and sophisticated data processing, the ZT Series 1000 bill/note acceptor sets the standard for rejecting invalid bills.
PLEASE NOTE - THIS STOCK IS SOLD AS-IS, BRAND NEW. PRODUCT CANNOT SUPPORT $5 AND CANNOT BE UPGRADED - no warranty.

Designed to hold fuses up to 16A for 250V equipment. The fuses is screwed into the holder. The holder has also be screwed into the equipment for ease of use. The holder has 4 terminals.

Dummy 28mm buttons for arcade machines. Made from hard plastic, these buttons are used to cover holes in cabinets or replace push buttons.

Pinball Backlatches (C- 137). This is a latch used on the back of the pinball machines that snaps in place securing the backbox and cabinet together.

On/off power rocker switch used to regulate power. 2 Position on and off. The Canal R Series is suitable for 125 and 250 voltage systems.

MS100 Top Load electronic coin mechanism. 4-Coin acceptor with a Positive Common Interface only. It needs a 12 volt supply, but will work with a voltage of between 10 and 15 volts. Peak operating current is 2.3A (at moment of coin acceptance). The acceptor has a 13 pin connector. Sorry we are unable to reprogram.

A replacement pink foot panel for the Dance Dance Revolution Machine

A UK manufactured coin mech, the unit comes with a 15 pin parallel interface and a 6 pin serial interface. The coin mech can be programmed to accept 8 different types of coins.

A Mini Arcade Push Button with a inbuilt microswitch.

A replacement foot panel for the Dance Dance Revolution DDR Machine.

Arcade pushbutton 33mm includes microswitch

A dummy button to put in place of a arcade push button. Allowing the operator to alter the control panel to suit games with less buttons.

A set of 4 plastic feet and screws used to mount a pcb safely into a cabinet.

A front loading electronic coin mechanism with a face plate. The device contains a CPU anti-string program that prevents customers from tricking the coin mechanism into giving free credits.

The mech contains intelligent sensing algorithms, which allow the acceptors to provide accurate, reliable validation.

The RM5 Evolution is an electronic coin validator for Australian coins. It is made in Italy and is a very high quality product. The RM5 Evolution is a Top Load/Bottom Reject mechanism, but can be adapted to be front loading through the use of an RM5 faceplate, however it will always be bottom rejecting.

The RM5 Evolution is a series of high quality, Italian made electronic coin validators. The RM5T30 model is Top Load/Front Reject mechanism, but can be adapted to Front Load/Front Reject, through the use of an RM5 faceplate. When using the top loading face plate, the RM5 Evolution is completely interchangeable with NRI or C120 coin mechanisms.

The RM5 Evolution RM5-T10 is a Dual Price Totaliser with timer function. It is an electronic coin validator that allows any service, where cost is determined by time used, to be paid automatically. It is particularly suited to car washes, parking meters, laundromats and other self service applications. The validator itself is Top Load/Front Reject, but can be adapted to Front Load/Front Reject through the use of an RM5 face plate.

A UK manufactured coin mech, the unit comes with a 15 pin parallel interface and a 6 pin serial interface. The coin mech can be programmed to accept 8 different types of coins.

Coin Controls C120 Electronic Coin Mechanisms will recognise and validate up to 12 different coins and/or tokens. The latest validator technology ensures high control over the acceptance of programmed coin types and rejection of fakes.

The C120 coin mechanism can be used for new or retrofit applications in the Arcade, Pinball, Gaming and Vending areas and is currently programmed to accept AUD 20c, $1 and $2 coins.

A top loading electronic coin mech, with enhanced security features over the S5 & S6 models. Due to the enhanced security these mechs are generally used in gaming machines.

Sanwa snap-in OBSF-30 button, Pink in colour. Widely used for buttons in Japanese cabinets like Blast City, Versus City, etc. It features a slightly convex plunger and snap-in installation (can be mounted in material with a thickness from 2 to 5 mm).

Sanwa snap-in OBSF-30 button. Widely used for buttons in Japanese cabinets like Blast City, Versus City, etc. It features a slightly convex plunger and snap-in installation (can be mounted in material with a thickness from 2 to 5 mm).

A 3" wheel built from polyurethane, designed to take heavy loads. Made with a mounting bracket to allow for easy assembly.

The Mars ME126 is an electronic coin mechanism for amusement applications. These units have a Top Load/Bottom Reject configuration.

The Mars MS126 is an electronic coin mechanism for amusement applications. These units have a Top Load/Bottom Reject configuration.

Coin Controls C120 Electronic Coin Mechanisms will recognise and validate up to 12 different coins and/or tokens. The latest validator technology ensures high control over the acceptance of programmed coin types and rejection of fakes.

The C120 coin mechanism can be used for new or retrofit applications in the Arcade, Pinball, Gaming and Vending areas and is currently programmed to accept AUD 20c, $1 and $2 coins.

A arcade pushbutton designed for changing the player view perspective in a driving race(but can be used for any purpose). A Globe is inserted into the button to illuminate it.

A bottom rejecting coin validator using accurate measurement technology with a large number of options for credit counting and vending-machine communication.