All Products

LAI Relay PCB

DDR Red floor neon light part for your Dance Dance Revolution (DDR) floor panel.

The gun board expansion slot used with Atomiswave motherboards for gun games like Extreme Hunting.

240 volt to 12 volt transformer.

240V to 108V transformer manufactured by Carinda International. 1 AMP output.

A Interface PCB for the Star Print system used in Pacific Gaming machines.

Bladed Microswitch made by FTM. For use with arcade buttons for short panels.

Cam metal door lock with key in 15mm length cylinder including latch. The key can be removed only in the locked position. 90 degree turn between locked and unlocked positions.

This noise filter is designed for low impedance loads to supress line to ground and line to line interference. The filter is enclosed in a metal case and terminals on both sides.

A 6 piece kit that forms a push button for an arcade/gaming machine. The completed button has a hollow centre for the lamp to be inserted (lamp is included). Made by Spain's Industrias Lorenzo company.

A noise filter designed to have 250V plugged directly into it with a maximum load of 6A. Has 3 terminals at the back to wire in the power.

Fluorescent Ballast For 15W Lamp is a durable and long lasting semi low loss ballast for a fluorescent 15W lamp from ATCO. This ballast emits a massive power of 250v / 50Hz and is suitable for most fluorescent light applications. Furthermore coming from a credible manufacturer such as ATCO, you know that you are going to have bright powerful lights for a long time.

A compact power supply that outputs at 24V 2.3A. The Input can be 100~250V 1.6A 50/60/440Hz or DC 120~300 1A.

A Blanking Plate is used to cover holes in equipment. In such equipment as arcade and gaming machines, cars, etc.

Tiger Scan is specially designed for less demanding applications. It is has a number of great features such as rotating gobos with indexed position, two-colour and rainbow effect beams and many others.

Original Manual
100 pages

• Dip Switch settings
• Wiring Schematics

GE1156 light bulb - Generic Equivalent

Amplifier Power Supply PCB
Active Crossover PCB
Wiring
Cords

Williams Electronics Games PCB

Namco PCB

springs small

Network Card (used)

Test Panel for Volume Buttons

Replacement 28mm nut for dummy buttons.

Route 66- Dreamcast memory card or rumble pack

LAI Swipe Card PCB

LAI Power Reset PCB

A fan with the measurements 8 x 8cms

Pinball Fuse Holders for Williams Pinball Machines

Interposer PCB (Different Model)

Interposer PCB

A standard pushbutton microswitch made by Matsushita, for use with standard arcade push buttons.

Powertran EI-Core 240V AC mains transformer with 6.6A dual multi tapped secondary configuration. Two sets of 0V, 9V and 12V secondaries are available at a maximum current of 6.6A (max current when 9V secondaries connected in parallel) . Primary is fitted with 200mm fly leads.

tickee tak driver

reels

Metal Shaft Glass Top

auto light bulbs

plastic tube

Plastic disk

This Watch Out Cabinet Sticker is for the right side of the arcade machine, and was developed specifically for the crane machine, the Watch Out Skill Tester cabinet. This sticker will be useful for customers who are needing to replace a sticker on their cabinet; who are reconditioning one of these skill tester machines; or, are wanting to upgrade a cabinet of the same proportions to this title.

DBSS MK-11 Board

Bi Colour LED Number Board