All Products

Sega Royal Ascot 2 DX - 839-0873

Sega Royal Ascot 2 DX - 839-0859

Derby Owners Club - Connect Board w/ Fuse and Cover - 838-11856-01

Derby Owners Club - SSR Board 6 - 839-0619-02

Yellow Sanwa snap-in OBSF-30 button. Widely used for buttons in Japanese cabinets like Blast City, Versus City, etc. It features a slightly convex plunger and snap-in installation (can be mounted in material with a thickness from 2 to 5 mm).

Replacement paper and ink for Atlus Venus photo machines.

Sega Royal Ascot SD - Display LED Counter - 171-5635

Sega Royal Ascot - Finish Post - 171-613

Sega Royal Ascot - Volume and Test Switch Panel

Seat Suitable for Upright Cabinet

Sega Royal Ascot - SSR BD 20EA - 839-0270-01

Sega Conn Bd B (part number 838-10801) for games such as Sega Rally 2, Star Wars Trilogy etc

Arrow switch for any Konami Dance Dance Revolution DDR arcade machine.

A 3 terminal button actuator microswitch to fit all types of push buttons and joysticks.

A Comestero 4-digit display timer to activate time service through a connection to a mechanical coin mechanism.

Daytona - Relay

Dance Maniax CD

Dance Dance Revolution 3rd Mix - Cartridge

Dance Dance Revolution 4th Mix - Cartridge

Dance Dance Revolution 2nd Mix - Cartridge

Dance Dance Revolution (DDR) Solo 2000 - Cartridge

CD for a Dance Dance Revolution 3rd Mix arcade machine.

Dance Dance Revolution 3rd Mix CD

CD for a Dance Freaks arcade machine.

Dance Dance Revolution 5th Mix - Cartridge

Green / Black Wooden board for Crisis Zone Machine. One side is Green, the other side is Black.

Crisis Zone SD Cabinet Speaker.

Crisis Zone Complete Wiring Harness for connecting the game kit with the cabinet. There are a total 12 different wiring sets.

The King of Fighters 2002 Poster

ZuPaPa! Poster

Senkoku 3 Poster

The King of Fighters 2000 Poster

A 5 piece kit that forms a push button for an arcade/gaming machine. The completed button has a hollow centre for the lamp to be inserted (lamp/switch is not included). Made by Spain's Industrias Lorenzo company.

A chrome finished zinc alloy die cast cylinder C-Clip Mounted Cam Lock with 90 degress rotation that uses a set of flat wafer Keys (Series - Assorted) to prevent the lock from opening unless the correct key is inserted. Suitable for using in many kinds of machines, doors, cabinets and frequently used for used for locking letter boxes, drawers, cash boxes and cash registers etc; with simple and quick mounting via the included fork C-clip.

The coin validator from microcoin, main feature is versatility by it's many programming options. Allowing it to be fully tailored to meet the operators requirements.

Atari 7586-DH-2LAEXTM

These light globes are generic pinball light globes (GE-44) and they are suitable for most pinball machines.

Stay Cool DDR Metal Header

Deluxe machines like Daytona have the 50" rear projector tvs. The game board output RGB and these cables connector from the game to the TV as BNC connectors. The fourth cord is for sync and there is also a power cable if needed.

Drum Mania Rubber Pad for Drum Pad Assembly. Can be used to replace Snare, High Tom and Low Tom parts. Also suitable for use with Percussion Freaks.

A white wheel connected to a metal bracket which can be connected to anything with it's 4 screw points or by welding.

This fits in the corners of the floor panels of your DDR dance machines. They provide rubber corner protection of the components underneath the panel and help to keep everything in place.

Replacement light globe/bulb for the disco lights. Designed for DDR dance machines. 12V, 20W.

Non Original Display Rom for a Roller Coaster Tycoon Pinball Machine.

A test panel complete with Service Button, Test Switch and 12V coin counter. Includes wiring for power and ground.

Drum mania rubber pad for Cymbal Pad or Hi Hat Assembly. Also suitable for use with Percussion Freaks.

12 Volt Power Amp PCB Board.

A wiring Harness that is part of the cables needed to allow Naomi Hardware system games to be plugged into a Jamma Cabinet. The harness also comes with a Sound Amp.

A 3.3V power supply. This is the additional power supply needed to run the Naomi Hardware System. All other power is supplied by the Jamma Cabinet itself.