A replacement 10 wire flat ribbon cable which can be used with NRI coin mechs and equivalent (C120, RM5, etc). The cable is 1 metre long, giving you enough length for installation into any cabinet. The interface is the standard 10pin connector on each end, which goes from the coin mech to the credit board of the machine.
About NRI Coin Mech Ribbon Cable - 10 pin to 10 pin flat ribbon cable (Type A - 1m)
A replacement 10 wire flat ribbon cable which can be used with NRI coin mechs and equivalent (C120, RM5, etc). The cable is 1 metre long, giving you enough length for installation into any cabinet. The interface is the standard 10pin connector on each end, which goes from the coin mech to the credit board of the machine.
Unit Dimensions :
1.3W x 0.1D x 100.0H cms
Condition :
New
Shipping Weight :
0.020 kg
Physical Weight :
0.023 kg
Location :
Australia
Warranty :
12 Months
Product Type :
Coin Mechs
More About NRI Coin Mech Ribbon Cable - 10 pin to 10 pin flat ribbon cable (Type A - 1m)
Nri Cable
1 metre cable
suitable NRI, C120, ICT and similar
Pinout for the 10 pin connector is as follows:
Pin 1 GND
Pin 2 UB +12V DC
Pin 3 output line 5
Pin 4 output line 6
Pin 5 return
Pin 6 total blocking
Pin 7 output line 1
Pin 8 output line 2
Pin 9 output line 3
Pin 10 output line 4
